Gold Member Since 2016
Family Gyptech Material Co., Ltd.

Glassfiber, Self Adhesive Tape, Self Adhesive Glassfiber Tape manufacturer / supplier in China, offering 65G/M2 9*9 Mesh Self Ashesive Glassfiber Tape, Glassfiber/Fiber Glass for Making Gypsum Cornice, Fire Resistence Polyester Wall Panel for Interior Decoration and so on.

(/ )

Supplier Homepage Product GLASSFIBER 65G/M2 9*9 Mesh Self Ashesive Glassfiber Tape

65G/M2 9*9 Mesh Self Ashesive Glassfiber Tape

FOB Price: Get Latest Price
Min. Order: 1,000 Square Meters
Port: Qingdao, China
Transport Package: PP Shrink Bag in Carton
Payment Terms: T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: GF-0986
  • Feature: Waterproof, Heat-Resistant
  • Fiberglass Type: E-Glass
  • Trademark: FAMILY GYPTECH
  • Origin: Shandong
  • Certification: CE, GS, ISO
  • Weave Type: Plain Woven
  • Alkali Content: Alkali Free
  • Specification: 48mm
  • HS Code: 70195900
Product Description
Fiberglass Drywall Joint Mesh Tape

Virtually any commercial or residential application of drywall finishing repairing the cracks and joints or holes of drywall, plasterboard, stucco and the other surface.

Width (mm): 25, 35, 48, 50, 100, 150, 200, 1000.
Length (m): 10, 20, 30, 45, 90, 153
Mass: 55---85g/sq. Meter.
Mesh: 8 × 8 or 9 × 9mesh/inch.
Colour: White, yellow, blue etc...
Drywall seaming tapes as well as private label and unlabeled tapes.
Each roll is shrink-wrapped, or plastic hand bag.
Other specification are available upon request.
Testing standard: ASTM-D579

65G/M2 9*9 Mesh Self Ashesive Glassfiber Tape

1. Wall must be clean and dry;
2. Center and apply tape over the length of the joint and pressing firmly;
3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4. Let dry completely, then sand slightly.
5. Apply sufficient thin finishing coats to produce a smooth wall surface.
6. Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.

* Failure to completely fill the joint may result in cracking
* For best results, use a setting-type compound
Send your message to this supplier
Mr. Jeff Wang
To: Mr. Jeff Wang

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category